Fix Errors And Speed-Up Your PC!

Last Updated:


download now

Download Latest Official Version
(4.8 MB)


Description: Regcure Pro© Speed Optimizer
Operating System: Windows 8, Windows 7, Vista, XP
Version: 3.1.5.0
Downloads: 3,281,199
Release Date:


PLEASE NOTE: The Windows Registry will be scanned and repaired by Regcure Pro© Speed Optimizer. This software will remove damaged registry entries, repair Windows and speed up your computer. The scan and repair process will take approximately 2 minutes.


Download / Scan Instructions:


FAQ

Frequently Asked Questions (FAQ):



What Is The Windows Registry?

The Microsoft Computer Dictionary, Fifth Edition, defines the registry as:

PLEASE NOTE: It is critical that you confirm that your system is cleaned of all spyware, adware, and viruses before correcting Registry problems. If not, these malicious programs will re-infect the Registry.

How Do I Fix Registry Problems?

Option 1: Automatic Repair (Novice User)

  1. Download Regcure Pro©.
  2. Install the program and then click Scan.
  3. The program will finish in approximately 2 minutes after your registry is scanned and repaired.
  4. Restart your computer.

Option 2: Manual Repair (Advanced Users)

Manual steps to recover a corrupted Windows© registry

The procedure that this article describes uses Recovery Console and System Restore. This article also lists all the required steps in specific order to make sure that the process is fully completed. When you finish this procedure, the system returns to a state very close to the state before the problem occurred. If you have ever run NTBackup and completed a system state backup, you do not have to follow the procedures in parts two and three. You can go to part four.

Part one

In part one, you start the Recovery Console, create a temporary folder, back up the existing registry files to a new location, delete the registry files at their existing location, and then copy the registry files from the repair folder to the System32\Config folder. When you have finished this procedure, a registry is created that you can use to start Windows XP. This registry was created and saved during the initial setup of Windows XP. Therefore any changes and settings that occurred after the Setup program was finished are lost.

To complete part one, follow these steps:

  1. Insert the Windows XP startup disk into the floppy disk drive, or insert the Windows XP CD-ROM into the CD-ROM drive, and then restart the computer.
    Click to select any options that are required to start the computer from the CD-ROM drive if you are prompted to do so.

  2. When the "Welcome to Setup" screen appears, press R to start the Recovery Console.

  3. If you have a dual-boot or multiple-boot computer, select the installation that you want to access from the Recovery Console.

  4. When you are prompted to do so, type the Administrator password. If the administrator password is blank, just press ENTER.

  5. At the Recovery Console command prompt, type the following lines, pressing ENTER after you type each line:

    md tmp
    copy c:\windows\system32\config\system c:\windows\tmp\system.bak
    copy c:\windows\system32\config\software c:\windows\tmp\software.bak
    copy c:\windows\system32\config\sam c:\windows\tmp\sam.bak
    copy c:\windows\system32\config\security c:\windows\tmp\security.bak
    copy c:\windows\system32\config\default c:\windows\tmp\default.bak

    delete c:\windows\system32\config\system
    delete c:\windows\system32\config\software
    delete c:\windows\system32\config\sam
    delete c:\windows\system32\config\security
    delete c:\windows\system32\config\default

    copy c:\windows\repair\system c:\windows\system32\config\system
    copy c:\windows\repair\software c:\windows\system32\config\software
    copy c:\windows\repair\sam c:\windows\system32\config\sam
    copy c:\windows\repair\security c:\windows\system32\config\security
    copy c:\windows\repair\default c:\windows\system32\config\default

  6. Type exit to quit Recovery Console. Your computer will restart.

Note This procedure assumes that Windows XP is installed to the C:\Windows folder. Make sure to change C:\Windows to the appropriate windows_folder if it is a different location.

If you have access to another computer, to save time, you can copy the text in step five, and then create a text file called "Regcopy1.txt" (for example). To use this file, run the following command when you start in Recovery Console: batch regcopy1.txt

With the batch command in Recovery Console, you can process all the commands in a text file sequentially. When you use the batch command, you do not have to manually type as many commands.

Part two

To complete the procedure described in this section, you must be logged on as an administrator, or an administrative user (a user who has an account in the Administrators group). If you are using Windows XP Home Edition, you can log on as an administrative user. If you log on as an administrator, you must first start Windows XP Home Edition in Safe mode. To start the Windows XP Home Edition computer in Safe mode, follow these steps.

Note: Print these instructions before you continue. You cannot view these instructions after you restart the computer in Safe Mode. If you use the NTFS file system, also print the instructions from Knowledge Base article KB309531. Step 7 contains a reference to the article.

  1. Click Start, click Shut Down (or click Turn Off Computer), click Restart, and then click OK (or click Restart).

  2. Press the F8 key.

    On a computer that is configured to start to multiple operating systems, you can press F8 when you see the Startup menu.

  3. Use the arrow keys to select the appropriate Safe mode option, and then press ENTER.

  4. If you have a dual-boot or multiple-boot system, use the arrow keys to select the installation that you want to access, and then press ENTER.

In part two, you copy the registry files from their backed up location by using System Restore. This folder is not available in Recovery Console and is generally not visible during typical usage. Before you start this procedure, you must change several settings to make the folder visible:

  1. Start Windows Explorer.

  2. On the Tools menu, click Folder options.

  3. Click the View tab.

  4. Under Hidden files and folders, click to select Show hidden files and folders, and then click to clear the Hide protected operating system files (Recommended) check box.

  5. Click Yes when the dialog box that confirms that you want to display these files appears.

  6. Double-click the drive where you installed Windows XP to display a list of the folders. If is important to click the correct drive.

  7. Open the System Volume Information folder. This folder is unavailable and appears dimmed because it is set as a super-hidden folder.

    Note This folder contains one or more _restore {GUID} folders such as "_restore{87BD3667-3246-476B-923F-F86E30B3E7F8}".

    Note You may receive the following error message:

    C:\System Volume Information is not accessible. Access is denied.

    If you receive this message, see the following Microsoft Knowledge Base article to gain access to this folder and continue with the procedure:

    309531  (http://support.microsoft.com/kb/309531/ ) How to gain access to the System Volume Information folder

  8. Open a folder that was not created at the current time. You may have to click Details on the View menu to see when these folders were created. There may be one or more folders starting with "RPx under this folder. These are restore points.

  9. Open one of these folders to locate a Snapshot subfolder. The following path is an example of a folder path to the Snapshot folder:

    C:\System Volume Information\_restore{D86480E3-73EF-47BC-A0EB-A81BE6EE3ED8}\RP1\Snapshot

  10. From the Snapshot folder, copy the following files to the C:\Windows\Tmp folder:

    • _REGISTRY_USER_.DEFAULT

    • _REGISTRY_MACHINE_SECURITY

    • _REGISTRY_MACHINE_SOFTWARE

    • _REGISTRY_MACHINE_SYSTEM

    • _REGISTRY_MACHINE_SAM

  11. Rename the files in the C:\Windows\Tmp folder as follows:

    • Rename _REGISTRY_USER_.DEFAULT to DEFAULT

    • Rename _REGISTRY_MACHINE_SECURITY to SECURITY

    • Rename _REGISTRY_MACHINE_SOFTWARE to SOFTWARE

    • Rename _REGISTRY_MACHINE_SYSTEM to SYSTEM

    • Rename _REGISTRY_MACHINE_SAM to SAM

These files are the backed up registry files from System Restore. Because you used the registry file that the Setup program created, this registry does not know that these restore points exist and are available. A new folder is created with a new GUID under System Volume Information and a restore point is created that includes a copy of the registry files that were copied during part one. Therefore, it is important not to use the most current folder, especially if the time stamp on the folder is the same as the current time.

The current system configuration is not aware of the previous restore points. You must have a previous copy of the registry from a previous restore point to make the previous restore points available again.

The registry files that were copied to the Tmp folder in the C:\Windows folder are moved to make sure that the files are available under Recovery Console. You must use these files to replace the registry files currently in the C:\Windows\System32\Config folder. By default, Recovery Console has limited folder access and cannot copy files from the System Volume folder.

Note: The procedure described in this section assumes that you are running your computer with the FAT32 file system. For more information about how to access the System Volume Information Folder with the NTFS file system, click the following article number to view the article in the Microsoft Knowledge Base:

309531  (http://support.microsoft.com/kb/309531/ ) How to gain access to the System Volume Information folder

Part Three

In part three, you delete the existing registry files, and then copy the System Restore Registry files to the C:\Windows\System32\Config folder:
  1. Start Recovery Console.

  2. At the command prompt, type the following lines, pressing ENTER after you type each line:

    del c:\windows\system32\config\sam
    del c:\windows\system32\config\security
    del c:\windows\system32\config\software
    del c:\windows\system32\config\default
    del c:\windows\system32\config\system
    copy c:\windows\tmp\software c:\windows\system32\config\software
    copy c:\windows\tmp\system c:\windows\system32\config\system
    copy c:\windows\tmp\sam c:\windows\system32\config\sam
    copy c:\windows\tmp\security c:\windows\system32\config\security
    copy c:\windows\tmp\default c:\windows\system32\config\default

    Note: Some of these command lines may be wrapped for readability.

  3. Type exit to quit Recovery Console. Your computer restarts.

Note: This procedure assumes that Windows XP is installed to the C:\Windows folder. Make sure to change C:\Windows to the appropriate windows_folder if it is a different location.

If you have access to another computer, to save time, you can copy the text in step two, and then create a text file called "Regcopy2.txt" (for example). To use this file, run the following command when you start in Recovery Console: batch regcopy2.txt

Part Four

  1. Click Start, and then click All Programs.
  2. Click Accessories, and then click System Tools.
  3. Click System Restore, and then click Restore to a previous RestorePoint.

Approved / Recommended Solution Links:

  1. Driver update scan
  2. Registry repair scan
  3. Virus scan
  4. Spyware scan

Regcure Pro©

Is Your Computer Slowing Down?

There are a lot of reasons that your computer might not be performing like it used to. Because the problem often has several different causes, it used to be tough (and expensive) to fix. You’d have to buy a number of separate programs to resolve each issue – but those days are behind us now that Regcure Pro is available. This is a sophisticated software suite which includes everything you need to optimize your computer.

Get Like New Performance With Regcure Pro

Regcure Pro offers computer users all of the tools that they need, whether you want to optimize your system just a little or do a complete system tune up to get truly peak performance from your PC. Regcure Pro’s Startup Manager allows you to increase your startup speed and free up system resources. It also allows you to adjust other settings to improve your PC’s speed – and that’s just one of the many tools included in this advanced system optimization suite.

Instantly Speed Up Your PC Now!

Regcure Pro has solutions for all of your Windows performance problems. It can scan, analyze and optimize your system’s memory use, find and remove unnecessary files cluttering your hard drive and clean your registry to resolve and prevent errors. Regcure Pro can even improve your browsing speed and protect your privacy online by clearing your web browser’s history and cache.

Regcure Pro Features: